Hardwax Oil ULTRA
Treatex Hardwax Oil Ultra is a next generation Hardwax Oil, designed to enhance and protect the natural beauty of all your interior timber surfaces. Hardwax Oil Ultra follows the success of our current formulas benefits of being user friendly, easy to apply, and quick drying, whilst improving ease of application and the durability of the finish.
The end result is a hard wearing, attractive finish in any situation including, floors, doors and kitchen worktops that is easy to maintain with our maintenance products and is spot repairable if the surface is damaged.
Treatex Hardwax Oil Ultra is also based on the Treatex formulation of sustainable raw materials such as Bees wax, Carnauba wax, Candilla wax, Linseed oil, Sunflower oil, Jojoba oil. It contains no biocides or preservatives.
Features
Comes in Flat Matt (210), Matt (220), Satin (230) or Gloss (240) sheen levels
Easy to apply – buffed, brushed or rolled on
Quick drying – usually dry within 3-6 hours
Low odour
Water resistant
Very durable – further strengthened with Treatex hardener
Easy to clean with Treatex Floor Care or Treatex Spray on Floor and Surface Clean
Has a warming effect on lighter coloured timbers
No sanding required between coats
Withstands high temperatures
Very durable
Easy to maintain with Treatex Wax Polish
Spot repairable
Slip resistance test BS 7976-2PTV. Suitable for domestic, commercial and wet areas.
Complies with regulation DIN 68861-1B: Resistance to spills of water, wine, beer, coffee, tea, fizzy drinks etc
Safe for use on children’s toys: DIN EN 71-3
Meets with VOC emissions regulations
Recommended for those with dust allergies; dirt and dust can be removed easily
Contains no biocides, preservatives or carcinogens
Slip resistance further increased with the addition of Treatex R12 Anti-Slip additive
Applications : Floors, doors, stairs, worktops, woodturning, skirting, furniture, instruments etc.
Coverage
1L will cover approximately 20m² in one coat / 12m² in two coats depending on the timber and method of application. 2.5L will cover approximately 50m² in one coat / 30m² in two coats depending on the timber and method of application. 10L will cover approximately 200m² in one coat / 120m² in two coats depending in the timber and method of application. 1L will cover approximately 3 doors in two coats depending on the timber and method of application.
Compatible with
Treatex Colour Tones / Hardener / Thinner / Natural Hardwax Oil / Wax Polish / Floor Care / Preparation Cleaner / R12 Anti-Slip additive.
Application Method 1
Sand 120-150 grit
Apply a thin coat of ULTRA using a good quality roller
Leave for 10 minutes
Slow buff with a soft pad to remove excess
Finish using a lint free cloth under the buffer
Leave for 45 minutes to dry with good ventilation
Apply the final coat with best quality microfibre roller
Usually ready for use after 8 hours
Usually ready for furniture after 18 hours
Application Method 2
Sand 100-150 grit
Apply the first coat using a good quality brush or roller
First coat will usually be dry within 3-6 hours with good ventilation
Apply the second coat using a good quality brush or roller
Usually ready for use after 8 hours
Usually ready for furniture after 18 hours
