STYCCOBOND B95 is a high performance, one part, flexible, moisture curing polyurethane adhesive used for installing a wide range of wood floorcoverings. It is non-flammable and is quick setting to develop a high bond strength. It is protected against bio-degradation and suitable for use over normal underfloor heating.

STYCCOBOND B95 can be used for securing engineered boards (semi-solids) and a wide range of plank and wood strip flooring.

STYCCOBOND B95 can be applied to STOPGAP levelling compounds, structurally sound, smooth, dry subfloors of concrete, sand/cement screed and plywood (Minimum 6mm flooring grade WBP).

Sound asphalt and other non-absorbent surfaces must be skimmed with a minimum of 3mm of the appropriate STOPGAP levelling compounds.

STYCCOBOND B95 can also be applied directly to STOPGAP waterproof surface membranes within 24 hours of the membrane curing.

SURFACE PREPARATION

Proper subfloor preparation is essential for the correct installation of any floorcovering. Subfloors must be structurally sound, smooth, dry (<65% RH) and free from laitance and any contaminants which will affect adhesion. Use STYCCOCLEAN C140 for removing grease, oil, polish, soap etc. from non-absorbent substrates.

Concrete and sand/cement screeds must be fully cured and any laitance or surface treatments must be removed.The temperature of the floor must be maintained above 10°C throughout the application and drying of the adhesive. Underfloor heating must be off for at least 48 hours before, during and after application.

For detailed information, request our Subfloor Preparation Guide.

TECHNICAL INFORMATION